Go to the Tutorials hub
Tutorials
| 1 | 2 | 3 | 4 | 5
Step by step instructions on how to enter your software serial number

Licensing OnClick Utilities

Your first step is to open your order conformation email that contains your serial number and to highlight it. Do not try to manually enter the serial number as errors can easily be made.

The Quick Guide
FindOnClick Click the "Enter Serial" button on the main menu
UndeleteOnClick Click the "Register/Buy" button on the main menu
PatchOnClick Click the program icon on the top left and select "Register/Buy"
HashOnClick For both programs go to Start > All Programs > 2BrightSparks > HashOnClick or DeleteOnClick, and select the "OnClick License Manager"
You only need enter your serial number once to license all OnClick programs

The Detailed Guide

FindOnClick and UndeleteOnClick

Copy your serial number (hold "Ctrl" and "C"), then run FindOnClick or UndeleteOnClick and select either the "Enter Serial" (FindOnClick) or "Register/Buy" button (UndleteOnClick) and the program will automatically paste your serial number into the appropriate place:

OnClick Utilities welcome screen

Click the "OK" button to license the program.

Step By Step Licensing Instructions

Run FindOnClick or UndleteOnClick and press the "Enter Serial" (FindOnClick) or "Register/Buy" button (UndleteOnClick) :

OnClick registration button

In either case the welcome and serial number entry window will appear:

OnClick Utilities welcome screen

Copy and paste your serial number. Here's how:

1 Click your left mouse button after you have positioned your curser immediately before the very first digit of your serial number (continue to hold the mouse button down):

ensure you click immediately after the last digit of your serial number

2 While holding down the left mouse button drag your mouse right so the entire serial number is highlighted:

your serial number is highlighted

3 Release your left mouse button once so the serial number continues to be highlighted.

4 Hold down and keep the "Ctrl" key pressed (the "Ctrl" key is often located on the lower left of your keyboard).

5 While keeping the "Ctrl" key pressed, press the "C" key.

6

The Serial number will be automatically pasted into the appropriate field.


7 Click the "OK" button (if the "OK" button cannot be seen then the serial number entry has been incorrectly entered).

Note also that the Lost/Forgotten Serial Number button is not available once a correct serial number has been pasted.

PatchOnClick

Click the program icon on the top left and select "Register/Buy":

Click the PatchOnClick icon

This will open the evaluation window in which you can copy your serial number.

HashOnClick and DeleteOnClick

For both programs go to Start > All Programs > 2BrightSparks > HashOnClick or DeleteOnClick, and select the "OnClick License Manager":

Select the OnClick License Manager

A window will open. Click the "Register" button:

OnClick License Manager

The OnClick serial number window will open:

OnClick Utilities welcome screen

After you have copied your serial number a message will appear:

OnClick License Manager

Click the "OK" button. A confirmation window will open:

OnClick License Manager

Click the "Exit" button.

Congratulations!

Your OnClick program will now be licensed and the evaluation version unlocked.

Trouble Shooting

Issues to check if you are still having problems:

Ensure you have downloaded and installed the current version of OnClick Utilities

The Serial Number may not have been copied to the clipboard successfully. Try again.

Ensure your system clock is showing the current date and time.

OnClick Utilities is already validated.

Go to the program "Help" > "About" menu item, or read the program title which will either say Freeware or Registered.

Your system has blocked access to the clipboard. In that case, type it in carefully. Note that the letter “O” is not used – only zeros

Go to Previous Page
No Next Page


Serial Numbers
Tutorials
| 1 | 2 | 3 | 4 | 5


All Material: 2BrightSparks Pte Ltd © 2015